EAM brings you a complete range of cleaning purge compounds adapted to soft and hard PVC, polyolefin resins and soft thermoplastics for all plastics converting equipments.
It cleans degraded polymers such a LDPE, HDPE, PP and pigments in your processing equipment both mechanically and chemically. Theses products are particularly recommended for material change, colour change, shut down and start up or strip and clean.
Three purge compounds are available:
CLEAN LDPE for low-density polyethyleneCLEAN HDPE for high-density polytethylene
CLEAN PP for polypropylene
CLEAN LDPE and PP are a filmable resin that will allow a continuous extrusion while purging (depending on the process for HDPE). The compound remains relatively fluid and can be itself easily removed from the extruder after purging. It contains no toxis, volatile or corrosive additives.
Strip and clean
Thanks to its non stick effect to metals, the screw is easy to remove. Using it just before dismantling your machine will reduce the cleaning time by over 50%.
Material and colour change
Depending on the MFI of the material that needs to be cleaned, our products may be added as a raw pellet form directly to your machine. However, where there is a large difference between the MFI of our products and the material to be cleaned, blending may be preferable to reduce the MFI difference.